2010 Enclave Tpms Not Reading Any Tires

How To Reset TPMS Tire Force per unit area Calorie-free on Buick Enclave (2008-2020)

| Oct 28, 2020 | Guide, Vehicle |

How To Reset TPMS Tire Pressure Light on Buick Enclave (2008-2020) – The Buick Enclave is an SUV from the American car brand Buick. The car shares its platform with the GMC Acadia, the Saturn Outlook, and the Chevrolet Traverse.

Enclave was presented to the public as a concept car in 2006 at the North American International Auto Testify. This automobile replaced both SUVs from the Buick range. In 2008, this car won the Best New SUV / CUV in the + C $ 60,000 course awarded by the AJAC, an clan of Canadian automotive journalists.

How To Reset TPMS Tire Pressure Calorie-free on Buick Enclave (2008-2020)

If you lot replacing a spare tire with a road tire containing the TPMS sensor on your Buick Enclave, the system will detect a malfunction and the low tire pressure warning low-cal will blink. When that happens, the TPMS sensor reset process must exist done. Depending on the vehicle model you have, hither are a few ways to reset the TPMS.

2008-2010 Models

Fourth dimension needed:7 minutes.

If you take 2008 2009 2010 Buick Enclave, you tin reset the TPMS past increasing or decreasing the tire pressure without a tool. Follow these instructions to get started:

1. Turn the ignition key to the "ON" position without starting the engine

   If your vehicle has an ignition push button, press the Engine Start/Stop button without touching the brake pedal

2. Press the Remote Keyless Entry (RKE) transmitter'south LOCK and UNLOCK buttons simultaneously for v seconds

   The horn will audio twice and the TIRE LEARNING ACTIVE message volition announced indicating the TPMS matching process has started
   

3. Activate the TPMS sensor

   Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire'southward air force per unit area until a horn chirp sounds

4. Repeat the process for the passenger side front tire, rider side rear tire, and the driver side rear tire

   A horn chirp will confirm that the sensor has been reset

5. Plow off the ignition after you reset the last tire

   The TIRE LEARNING Active message will disappear

6. Accommodate the tire pressure in all four tires recommended on the tire placard

   Done!

2011-2017 Models

Unlike the previous model year, you'll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this 2011 2012 2013 2014 2015 2016 2017 model years. Follow these steps to do information technology:

• Turn the ignition key to the "ON" position without starting the engine
• Press the Remote Keyless Entry (RKE) transmitter's LOCK and UNLOCK buttons simultaneously until the horn sounds twice
• Start from the commuter side front end tire, place the TPMS Relearn Tool confronting the tire sidewall, near the valve stem. And so press the button to activate the TPMS sensor
• A horn chirp volition confirm that the sensor has been reset
• Echo the process for the passenger side front tire, passenger side rear tire, and the driver side rear tire
• Turn off the ignition after you lot reset the last tire
• Adjust the tire pressure in all four tires recommended on the tire placard

2018-2020 Models

Just like the previous model, you lot'll demand TPMS Relearn Tool to reset the Tire Pressure Monitoring Arrangement in this latest Enclave model yr. Depending on your vehicle trim level, there are ii ways to do this. Here'due south how to do it:

Base of operations Level Display

• Turn the ignition key to the "ON" position without starting the engine
• Go to the INFORMATION card by using the ◄ ► navigation button

• Curl downward to the TIRE PRESSURE menu
• Press and hold the ✓ push until the horn sounds twice to enter the relearn style
• Beginning from the driver side front end tire, place the TPMS Relearn Tool confronting the tire sidewall, most the valve stem. Then printing the button to activate the TPMS sensor
• A horn chirp volition confirm that the sensor has been reset
• Echo the process for the passenger side front tire, rider side rear tire, and the driver side rear tire
• Turn off the ignition later yous reset the last tire
• Adapt the tire pressure in all iv tires recommended on the tire placard

Uplevel Display

• Press and holds the ENGINE START/Stop button for five seconds without touching the brake pedal
• Press the ◄ navigation button to access the cluster applications
• Select INFO
• Scroll down to the TIRE Pressure level carte
• Printing and hold the ✓ button until the horn sounds twice to enter the relearn fashion
• Showtime from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, nigh the valve stem. And then printing the button to activate the TPMS sensor
• A horn chirp will ostend that the sensor has been reset
• Repeat the process for the passenger side front end tire, rider side rear tire, and the driver side rear tire
• Turn off the ignition after y'all reset the last tire
• Adjust the tire force per unit area in all four tires recommended on the tire placard

These instructions are based on the Buick Enclave owner'southward manual. This procedure should utilize to the first and second generation of the Buick Enclave (2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 model years). Hopefully, the commodity How To Reset TPMS Tire Pressure Light on Buick Enclave (2008-2020) can solve your problem. Good Luck!

solisthreatheen.blogspot.com

Source: https://seventrumpet.com/reset-tpms-tire-pressure-light-on-buick-enclave/

Bagikan Artikel ini